welding of tubes
英 [ˈweldɪŋ ɒv tjuːbz]
美 [ˈweldɪŋ əv tubz]
网络 炉管焊接
双语例句
- It is made by machining and welding, the basic supply being made of bent copper tubes.
水冷母线管主要由弯曲的铜管加工和焊接而成。 - The welder is designed for the internal welding of various electron tubes, electronic components, instruments and meters, relays, bulbs and glasses.
该机广泛应用于各种电真空器件、电子元件、仪器仪表、继电器、灯泡、眼镜等内部结构的焊接。 - A reasonable welding process was made concerning problems in the CO2 gas shielded arc welding of flange tubes and satisfactory results were achieved.
文章针对法兰筒焊接过程中采用CO2气体保护焊易出现的问题，制订了合理的焊接工艺，最终取得满意的结果。 - Simulation of effects of stand-off distance on explosive welding of three-layer tubes
间隙对三层圆管爆炸焊接影响的数值模拟 - Laser Welding and Cutting of Tubes
激光焊接和切割管材 - In this paper, the reasons for repairing welding failure of tube plates in titanium heat exchanger as well as welding joints in heat exchange tubes are analyzed and reliable measures to restore tube plates and welding joints of heat exchange tubes are put forward and implemented.
分析了钛换热器管板与换热管焊接接头补焊失效的原因，提出了实施修复的可靠措施。 - Welding Quality Supervision of Large Diameter Thick Wall Tubes
厚壁大直径合金管焊接的质量监控 - The Essential Welding Factors and Mechanism of the Longitudinally High Frequency Welded Pipe The application of straight welded tubes in oil and chemical industry
高频直缝焊钢管的焊接要素与机理直缝电阻焊钢管在石化工业中的应用 - The geometrical relation of elliptic imaging is studied for welding seam image of the butt welds in straight tubes.
针对具体的钢管直管对接焊缝图象，研究了其椭圆成象的几何关系，提出了焊缝图象区域模型，为进一步处理焊缝图象提供了理论依据。提出了一种模型基多分辨率图象自适应分割算法。 - Welding of Concentrated Descending Tubes in High-pressure Drums
高压锅筒集中下降管的焊接 - The procedure of steel tube welding of the large conduit bridge in factory, welding and assemblage in the field are introduced. The production and installation experiences of big diameter steel tubes are summarized.
详细介绍大型管桥钢管工厂内焊接、工地焊接及现场吊装的过程，总结大直径钢管的制作安装经验。 - A Study on Welding Technique of Circumferential Square Butt Joint of Small-Diameter Stainless Steel Tubes
细直径不锈钢管环缝焊接技术研究 - Mechanical performance of strip material used as HF welding inner-grooved copper tubes has been tested. The grain size and extension rate of tubes at different welding speed have been measured.
本文对高频焊内螺纹铜管原材料的机械性能和在不同焊接速度下的高频焊内螺纹铜管的晶粒度和扩口率进行了测定。 - The principle of high frequency welding process and method in manufacture of lank seam tubes are elucidated. The process parameters involved in affecting the quality of welding seam are also explained.
论述了直缝钢管高频焊接的工作原理与方法，并对影响高频焊接焊缝质量的有关工艺参数进行了分析。 - Friction welding of thin walled tubes of stainless steel and aluminium alloy
不锈钢与铝合金薄壁管的摩擦焊 - Laser welding of stainless steel tubes and tube plates
不锈钢管子&管板的激光焊接 - The welding experiment and procedure qualification for manual TIG welding of stainless steel tubes with flux cored electrode is presented in this paper.
介绍采用药芯焊丝手工钨极氩弧焊焊接奥氏体不锈钢管道所进行的焊接试验及工艺评定。 - Laser beam welding of porous tungsten pieces and nicked tubes
多孔钨片与镍管的激光焊接 - Method of inspection for the welding of marine boiler tubes
船用锅炉炉管焊接检验方法 - In this paper the state of art of welding of the principal pressure parts of utility boilers such as steam drums, headers, tubes and membrane waterwalls at home and abroad is described.
本文介绍了电站锅炉主要受压部件：汽包、集箱、管子和膜式水冷壁的国内外焊接概况。 - Welding Repair Technology for Life Extension of Ethylene Cracking Furnace Tubes
乙烯裂解炉炉管延寿的焊接修复技术研究 - This paper made a description of the technical for manufacturing precision titanium strip for welding tube and the test of welded titanium bubes. The microstructure mechanical properties of the welded titanium tubes were analyzed.
本文主要介绍焊管用高精度钛带的研制工艺，以及钛带的焊管试验、焊管的性能。 - Use and welding of aluminized steel tubes in heat exchangers
换热器中渗铝钢管的应用及焊接 - The qualified welding procedure has successfully been used for the welding of the P91 steel furnace tubes in three ethylene cracking furnaces.
并依此制定工艺，成功地完成了该钢种在三台乙烯裂解炉中的焊接应用。 - Research of Welding Effect on Creep Damage of High Temperature Furnace Tubes
焊接对HK40高温炉管的蠕变损伤与断裂的影响 - Non-filling Wire Automatic Pulsed Tungsten Arc Welding Technology of Small Tubes
钢管对接&非填丝自动钨极脉冲氩弧焊的应用 - As the tubes were welded onto the main frame, The welding parts have deformation and perpendicularity of tubes always out of tolerance because of welding residual stress, so, remedy of tube perpendicularity is normally required.
因座椅是焊接制成，由于焊接残余应力的存在，焊接件出现焊接变形，所以支撑管的垂直度会一定程度偏离公差，通常需要矫正。